Don't know if anyone can use em but here they are......
download
download
Monday, March 30, 2009
Saturday, March 28, 2009
*NEW TUT* Club Misfit ID
There's really a million different possibilites for this but it's also gonna be easy peasy!
You will need.....
My Template #25 (see post below)
Eyecandy 4000 Gradient Glow filter
Xero Fritillery filter
MuRa Meister Copies filter
Papers from scrap kit of choice
A barcode font here
A pixel font of choice
Tube of choice. I'm using a tube from Elias Chatzoudis you can purchase it here
Let's get started....
Open my template in Paint Shop
Delete "melissaz creationz" layer
Layers>New Raster Layer
Flood Fill with white> Layers>Arrange>Move to Bottom
Open up 3 or more papers from the kit you chose & minimize
On the template, make the "sm rectangle" layer active
Selections>Select All>Float>Layers>New Raster Layer
Flood fill with a paper from your kit
Effects>PlugIns>Eyecandy 4000>Gardient Glow
Use these settings:
This will make a black line around the original square which is what you want!
Now, repeat the above steps in the "sillouettes" "stars" & "lg rectangle" layers of the template. I did omit the gradient glow around the stars but depending on your tastes you can add it.
Make the "pink lines" layer active
Selections>Select All>Float>Layers>New Raster Layer
Flood fill with a solid color that matches your papers
Selections>Select None
Add a drop shadow of your choice....do not apply the gradient glow to the stripes
Make the "square" layer active
Copy & paste your tube onto the canvas, align so that the part of the tube you want in the frame is inside the frame
Make the "square" layer active again
Selections>Select all>Selections>float
Selections>Invert
Make your tube layer active
Cut
This should cut your tube so the only part of the tube you have left if the part you wanted in the frame
Make the square layer active again
Selections>Select All>Float
Flood fill with a solid color of choice (no need to make this a new layer)
Effects>PlugIns>Xero>Fritillery with these settings:
Granularity:5
Aggression:30
Tesselation:10
Variation: 23
You can slide the bar up & down on the variation setting to suit your taste
Make "square frame" layer active, apply gradient glow with same settings as above.
Make the "club queen" layer active
Selections>Select All>Float>Layers>New Raster Layer
Flood fill w/ solid color (or 2)
Apply Fritillery with same settings as above
Make "club queen" layer active again & apply the gradient glow with same settings as before
Make "glitter" layer active
Adjust>Sharpen>Sharpen
Now make the "lg rectangle" layer active
Type a saying (mine says "club misfit vip member") in a small font (I used Pixellette sz 6) as a vector layer. This will be the type that's on the lg rectangle diagonally.
Layers>Convert to Raster Layer
Select the paper layer inside the large rectangle
Selections>Select All>Float
Now select your text layer
Apply the MuRa Meister Copies filter with these settings:
You can play with the "tile gap" slider to make the text to your liking
Selections>select none
Lower the opacity og the text layer to 50 or less
Now, with your barcode font, type your name or "Misfit & your name" as a vector layer
Adjust the height &/or width
Layers>Convert to Raster Layer
Apply gradient glow settings to the barcode with above settings using white instead of black
Add your copyright info, crop, delete solid white layer at the very bottom & save!
Any questions, don't hesitate to ask....I'm fairly new at the tut thing so I hope this all makes sense! LOL
*hugz*
Melissa
Friday, March 27, 2009
Problems with File Links...
It was brought to my attention that there was a problem with the links to download the latest temps & easter Eggs. And that Mediafire had a bunch of pop ups *grrrr* So I moved the files to 4Shared & also zipped them! Thanks Ladyqueen for all your input!! *hugz*
Zip for the Easter Eggs: download
Zip for Temps 1-23: download
I really hope these work & I apologize for any problems it caused!
Zip for the Easter Eggs: download
Zip for Temps 1-23: download
I really hope these work & I apologize for any problems it caused!
Wednesday, March 25, 2009
Tuesday, March 24, 2009
Sunday, March 22, 2009
Tuesday, March 17, 2009
4 New Blog Templates!
Sassy Template (used "Hey Sassy" kit by MandaBean)
Plain Paisley Template (used "Happy Go Lucky" kit by Shabby Princess)
Meadows Template (used "July's Freebie" kit by July Designs)
Diva Template (used "Hope" kit Scraps by Jessica)
Sunday, March 15, 2009
Was just messin around & came up woth these this mornin...not sure if anyone can use em but here ya go! You can download them HERE
Saturday, March 14, 2009
Thursday, March 12, 2009
Tuesday, March 10, 2009
New Tut "Big Rockstars"
You will need:
My template # 6 below
I used a scrap kit by Honored Scraps called Rock It, Roll It available for purchase at Tresured Scraps here
Mask of Choice
Eyecandy 400 Gradient Glow filter
Penta.com Jeans filter
Xero Radiance filter
MuRa Meister Copies filter (for your name part)
A tube (or 2) of choice of a "rocker chick" lol.
I used one by Ismael Rac available for purchase at MPT
Ok, let's get started.....
Open Template 6, delete "melissaz creationz" layer
Layers>New Raster Layer
Flood Fill with white> Layers>Arrange>Move to Bottom
Copy & paste your tube, Layers>Arrange>Bring to Top
Select Frame Background (either one)> Selections>Select All>Float
Copy & paste tube onto canvas
Arrange to liking so that whatever you want in the frame is surrounded by the marching ants
Selections>Invert
Make that tube layer active> Cut
Repeat for other frame background
Now, select the part of the tube that's in the frame
Apply Xero Radiance filter to it using the default settings
Repeat for other frame/tube
Select frame background (either one)
Selections>Select All>Float>Layers>New Raster Layer
Flood fill with color from tube OR a paper from your kit
Repeat for other frame background
Select Frame (either one)
Flood fill with color from tube OR a paper from your kit
Apply EyeCandy 4000 gradient glow to the frames with these settings
Apply drop shadow with these settings:
Vertical:2
Horizontal: 2
Opacity 50
Blur 5
Select narrow rectangle background (either one)
Layers>New Raster Layer
Flood fill with color from tube
Apply the Penta.com Jeans filter with the default settings
Repeat for other narrow rectangle layer
Select rectangle frames, flood fill with black or a dark color from your tube
Apply Eyecandy 4000 Gradient Glow with same settings as above
Apply drop shadow with same settings as above
Repeat with the other rectangle frame
For the inner circle, Select>Select All>Float
Copy & paste a tube of choice OR a paper from your kit
Selections>Invert
make tube or paper layer active>Cut
If you used a tube, select tube, Layers>Duplicate
Image>Mirror
Select the frame to this circle
Selections>Select All>Float
Flood fill with a color from your tube
Apply Gradient Glow & drop shadow to it as you did above for the other frames
Select the star layer
Selections>Select All>Float
Flood fill with color fom your tube
Apply drop shadow with same settings as above
Select word art
Apply Eyecandy4000 Gradient Glow with settings above EXCEPT on the "color" tab, you want to click on the second box of color (on the sliding scale thing) & hit "remove" so that you only have one box with your color on the slider scale & you will need to choose a different color (one from your tube). Don't use black.
Select Large Circle
Selections>Select All>Float
Layers>New Raster Layer
Flood fill with a somewhat dark paper from your kit
Type in your name in a small font (I used Pixellette sz 6) as a vector layer
Layers>Convert to Raster Layer
Select the paper layer inside the large cicle
Selections>Select All>Float
Now select your text layer
Apply the MuRa Meister Copies filter with these settings:
Make sure the text layer is selected
Layers>Properties
Change the Blend Mode to Overlay OR play with the other Blend Modes to see which you prefer
Select Cirlce frame layer
Selections>Select All>Float
Repeat the same steps for this frame as you did for all the other frames (Gradient Glow & drop shadow)
Select bottom white layer
Flood fill with black OR color or paper from your kit & apply your mask
With Mask Layer selected, Layers>Merge>Merge Group
Add any embellishments, I used the music notes with Eyecandy 4000 Gradient Glow around them (same settings as above) & the strings from the Rock It Roll It kit
Add your copyright info & you're finished!
Monday, March 9, 2009
Saturday, March 7, 2009
Thursday, March 5, 2009
Subscribe to:
Posts (Atom)